Sorry, the USB AllStar Adapter is out of stock and undergoing redesign.
Advanced Repeater Systems

USB AllStar Adapters

 Just $85 + shipping



Our USB AllStar Adapters are designed for plug and play with popular portable radios or for installation with virtually any radio or repeater.

AllStar is different from other Internet linking networks in that you can add multiple nodes, in any link or repeater configuration, to interconnect and bridge radio networks such as D-Star, IRLP, EchoLink, and MDR. 

Further, AllStar has incredible high-fidelity audio.  Once you experience the AllStar sound, you won't be satisfied with anything else!

With the Advanced Repeater Systems USB AllStar Radio Interface Adapter, it is easy to join the exciting world of AllStar by creating an AllStar Node or Link to your Repeater.

The Radio Interface Adapter utilizes the CM108 chipset, installed on a high-performance 7.1 channel soundcard.  The Adapter has been tested and is compliant with USB 2.0 Full Speed (12 Mbps) Specification, USB Audio Device Class Specification 1.0 and USB HID Class Specification 1.1. 

The Adapter is USB bus-powered (mode Type A), no external power required.

USB AllStar Radio Interface Adapters are available with speaker/microphone connectors specifically designed for most Icom, Kenwood, Yaesu, Alinco, Baofeng and Wouxun portables.

The Adapter has 3 status LEDs for indication of Power and Computer Communication, Rx Modulation and Tx Key. Potentiometers set the transmit and receive audio levels.

Adapters are preset at the factory and are ready for plug and play operation. 



                            Yaesu Speaker/Mic Plugs

Yaesu has at least four different types of Speaker/Microphone Plugs that are not interchangeable.
 
Sorry- we do not have the new 7-pin waterproof connector for the VX-8DR or -8R.

Check the following Speaker/Mic Plug types for your radio.

                                        

This is the Yaesu Waterproof Plug for the VX-6R, VX-7R, FT-270R, FT-277 & VX-170.






This is the standard Yaesu Plug for the VX-2, VX-3R, VX-8GR, FT-60R, FT-250R, VX-150, VX-5R, VX-110, VX-2R, FT-1DR, and the FT-1D. 

Some older Yaesu radios use the Icom plug below. 




                    Icom, Alinco Speaker/Mic Plug




This 2-prong Plug fits Icom, some older Yaesu, Radio Shack, most Alinco and other compatible portable radios.  Please note that some Icom portable radio such as the ID-31 and the ID-51, and others, require a speaker/mic adapter cable available from Icom.


      Kenwood, Wouxun, Baofeng Spk/Mic Plug



This 90-degree Plug fits most Kenwood, Wouxun, Baofeng, some Alinco and other compatible portable radios.

Contact ARS at Info@ARSrepeaters.com if you have questions about the Adapter for your radio.

Price: $85 + $10 U.S.A. Shipping, Handling & PayPal fees 

Please specify the manufacturer and model of your radio after ordering by sending us an e-mail to: Orders@ARSrepeaters.com


For U.S. Orders ONLY
        
 
 Sorry, Out of Stock.


International Orders

Shipping to most countries is $25 for up to 3 Adapters.

Please note that International shipping is at buyer's risk.

U.S. Customs Requires:

         1. Full Name
         2. Complete Shipping Address

Click the PayPal button below for International Orders.
  
   Sorry, Out of Stock.


           
* AllStar requires the use of a Linux computer and knowledge of Linux and the AllStar software and operating system which is available on the AllStar website.


 

Advanced Repeater Systems
   
   Info@ARSrepeaters.com

    



Website Builder